If you're looking to install asterisk 13, you've come to the right place. This article will guide you through the process of installing asterisk 13 on your system. We'll cover the basics of what you need to know before you begin, as well as how to install asterisk 13 and the various components that make it up.
Asterisk is a free and open source framework for building communications applications and is sponsored by Digium. Install services for Asterisk 13 include both a graphical user interface (GUI) and a command line interface (CLI). The GUI is called AsteriskNOW and is a pre-configured and ready-to-use Asterisk distribution. The CLI is called FreePBX and is a web-based application that runs on top of Asterisk.
After installation is complete, check that the new service is running by running the command: systemctl status asterisk You should see something like this: ● asterisk.service - LSB: Asterisk PBX and telephony daemon Loaded: loaded (/etc/init.d/asterisk; bad; vendor preset: disabled) Active: active (running) since Mon 2016-05-09 15:05:06 EDT; 3s ago Docs: man:systemd-sysv-generator(8) Process: 1807 ExecStop=/etc/init.d/asterisk stop (code=exited, status=0/SUCCESS) Process: 1823 ExecStart=/etc/init.d/asterisk start (code=exited, status=0/SUCCESS) CGroup: /system.slice/asterisk.service ├─1824 /usr/sbin/asterisk -f -U asterisk -g asterisk -n -vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv